Back to All ArticlesDJI Enterprise Drone Comparisons

DJI Matrice 4T vs Matrice 5T: Thermal Drone Comparison

Rohit Singh
November 21, 2026
8 min read

Choosing between the DJI Matrice 4T and Matrice 5T starts with the work the aircraft must do. Both are compact enterprise platforms with thermal imaging, three visible cameras, a laser rangefinder, RTK support, and tools for inspection and public-safety missions. The 5T adds a higher native thermal resolution and a different obstacle-sensing suite. The 4T remains a capable option where its thermal detail and operating envelope meet the project requirement.

This comparison uses DJI's published specifications checked on November 21, 2026. Manufacturer maximums are measured under stated test conditions; they are not promises of field performance. See the Matrice 4 Series specifications and Matrice 5T specifications for full regional details.

At a glance

SpecificationDJI Matrice 4TDJI Matrice 5T
Native thermal sensor resolution640 × 512 at 30 Hz1280 × 1024 at 30 Hz
Thermal image modesUp to 1280 × 1024 output with Super Resolution enabledNative 1280 × 1024; UHR still images up to 2560 × 2048
Visible cameras48 MP wide, 48 MP medium tele, 48 MP telephoto50 MP wide, 50 MP medium tele, 50 MP telephoto
Laser rangefinderUp to 1,800 m under DJI's stated target conditionsUp to 3,000 m under DJI's stated target conditions
Obstacle sensingOmnidirectional vision with a downward 3D infrared sensorVision sensing, rotating LiDAR, and mmWave radar
Maximum flight timeUp to 49 minutes, no wind, no payloadUp to 59 minutes, no wind, no payload
Ingress protectionDJI lists no standard protection levelIP55
PositioningRTK fix: 1 cm + 1 ppm horizontal; 1.5 cm + 1 ppm verticalRTK fix: 1 cm + 1 ppm horizontal; 1.5 cm + 1 ppm vertical

Thermal imaging: the clearest difference

The Matrice 4T's thermal camera has a native resolution of 640 × 512 and a 30 Hz frame rate. DJI also lists 1280 × 1024 thermal photo and video output when Super Resolution is enabled in supported conditions. That higher output mode should not be confused with the sensor's native resolution.

The Matrice 5T uses a native 1280 × 1024 thermal camera at 30 Hz. That is four times the pixel count of a 640 × 512 sensor, which can help an operator inspect finer thermal patterns or identify smaller details from a similar viewpoint. The actual result still depends on target size, distance, optics, atmosphere, motion, and the operator's workflow. Both aircraft support temperature measurement features; check the current DJI specifications and software version for supported modes and limits.

Visible cameras, rangefinding, and sensing

Both aircraft combine wide, medium-telephoto, and telephoto visible cameras with a laser rangefinder. The 4T's visible cameras are listed at 48 MP each; the 5T's are 50 MP each. DJI lists a maximum rangefinder measurement of 1,800 m for the 4T and 3,000 m for the 5T under specific reflectivity and visibility test conditions. These figures describe measurement conditions, not guaranteed operating ranges in rain, fog, or poor visibility.

Their sensing systems differ. The 4T uses an omnidirectional binocular vision system supplemented by a downward 3D infrared sensor. The 5T combines vision sensing with rotating LiDAR and mmWave radar. That additional sensor mix may matter for missions involving low-light operations, thin obstacles, or automated workflows, but it does not remove the need for flight planning, pilot judgment, visual checks, and local operating approvals.

Endurance and weather protection

DJI lists a maximum flight time of 49 minutes for the Matrice 4T and 59 minutes for the Matrice 5T. Both figures are measured without a payload in windless conditions, and usable flight time will be lower or vary with flight profile, accessories, temperature, battery condition, and safety reserves. Plan a mission around the expected return reserve rather than the headline maximum.

The 5T has an IP55 ingress protection rating and a specified operating temperature range of -20°C to 50°C under DJI's stated conditions. DJI lists no standard protection level for the 4T. This distinction is important when a project involves rain or dust exposure: do not treat the 4T as weather-sealed, and do not assume the 5T's rating makes every flight condition safe. Follow the manufacturer's operating limits and local rules.

Which model fits your work?

The Matrice 4T may fit teams that need a compact multi-camera thermal aircraft and can work within its native 640 × 512 thermal resolution and operating conditions. The Matrice 5T is the stronger specification fit when native 1280 × 1024 thermal detail, a longer stated maximum endurance, IP55 protection, or the LiDAR and mmWave sensing combination are required.

Before selecting either model, list the smallest target you need to detect, the inspection distance, thermal measurement requirements, expected weather, required aircraft endurance, mapping or reporting workflow, and any compatibility with existing software or docking systems. Confirm the exact regional aircraft configuration, accessories, and approvals before procurement. The E3 Nepal drone catalog lists the Matrice models; contact the team for current Nepal availability and configuration details.

Summary

Matrice 5T's main measurable gains are native thermal resolution, laser rangefinding distance under DJI's test conditions, maximum stated flight time, IP55 ingress protection, and its LiDAR/mmWave/vision sensing combination. Matrice 4T still provides a capable thermal, visible-camera, and rangefinding platform for missions whose requirements fit its published specifications. The right choice depends on the inspection target and operating conditions, not on a model number alone.

Sources: DJI Matrice 4 Series specifications · DJI Matrice 5T specifications.

Practical Field Engineering Tools

Plan Your Nepal Drone Mission or Get Official Pricing

Calculate high-altitude flight GSD, check CAAN permit regulations, or request official 13% VAT quotations.

RS
Rohit Singh

Article contributor for E Three Sales & Services. See the sources linked in the article for manufacturer or regulatory specifications.