Nepal Aerial Survey & Engineering GSD Calculator

Nepal Drone Flight, GSD & Survey Mission Planner

Engineered specifically for Nepal's terrain. Calculate Ground Sampling Distance (GSD), high-altitude Himalayan air density battery loss, flight duration, and estimated photo volume for DJI Enterprise drones across Ropani, Bigha, and Hectares.

Step 1: Select DJI Enterprise Drone Model
Step 2: Project Elevation in Nepal (AMSL)
1400m AMSL
Step 3: Survey Boundaries & Flying Height (AGL)
Flight Altitude Above Ground (AGL):100 Meters (~328 ft)
30m (Ultra-High Detail GSD)100m (Standard Mapping)300m (Rapid Recon)
Frontal Overlap80%
Side Overlap75%

Mission Telemetry Summary

Instant photogrammetry estimation

E3 Certified
Ground Sampling Distance (GSD)
2.66 cm / pixel

✅ Standard Topographic & Infrastructure mapping grade

Area Coverage
2.54 Ha
50 ROPANI (25,436 m²)
Batteries Needed
1 Sets
~28 min / flight at this altitude
Total Flight Time
~2 Minutes
Distance: 0.99 km
Estimated Photos
~47 RAW/JPG
Payload: 4/3
Send Flight Plan & Quote to Teku Engineering Team
Teku Showroom Support • Official DJI Warranty • CAAN Ready

Engineering Guide: Aerial Photogrammetry & LiDAR Flight Planning in Nepal

1. Understanding GSD in Nepal Terrain

Ground Sampling Distance (GSD) represents the distance between two consecutive pixel centers measured on the ground. In Nepal, cadastral land surveys require GSD < 2.0 cm/px, while hydropower river basin topography generally uses 3.0 to 5.0 cm/px.

2. Himalayan Altitude Derating

Air density drops by roughly 10% per 1,000 meters of elevation gain. Flying a DJI Matrice 350 RTK or Mavic 3E in Upper Mustang or Manang (3,500m+) reduces propeller thrust efficiency, demanding higher RPMs and consuming battery capacity 25–40% faster than in Terai plains.

3. Nepal Land Units Conversion

Our calculator natively converts between standard SI metrics and local Nepalese measurements: 1 Ropani = 508.72 m² = 16 Aana; 1 Bigha = 6,772.63 m² = 20 Kattha.